المواصفات الفنية لمهمات شبكات التوزيع
- 01 - الموزعات
- 02 - لوحات الجهد المتوسط والمنخفض
- 03 - كابلات
- 04 - موصلات
- 06 - كابلات جهد منخفض احادية معزولة
- 07 - اكشاك
- 08 - محولات
- 09 - أعمدة
- 10 - عازلات
- 11 - مانعات الصواعق
- 12 - منظمات الجهد
- 13 - نهايات
- 14 - وصلات
- 15 -ملحقات كابلات
- 17 - محولات التيار والجهد
- 18 - ملحقات هوائية
- 19 - قواطع تيار
- 20 - العدادات
- 21 - مكثفات
- 22 - لمبات وكشافات
- 23-EESS& مولدات
- 24 - طاقة شمسية
- 25 - ملحقات المحولات
- 26 - مقاوم التأريض المحايد
- 27 - شواحن بطاريات
- 28 - عدد وأدوات
- 29 - مواد الحماية
- 30-مهمات السلامة والصحة المهنية
- 32- اجهزة تحليل الطاقة
13 - نهايات
-
EDMS 13-100-2 TECHNICAL SPECIFICATION FOR CABLE TERMINATION FOR XLPE INSULATED CABLES 12/20 (24) kV (Indoor and outdoor)
Technical Code: EDMS 13-100-2
Issued Date: 24/01/2023
TECHNICAL SPECIFICATION FOR CABLE TERMINATION FOR XLPE INSULATED CABLES 12/20 (24) kV (Indoor and outdoor)
-
EDMS 13-101-1 SPECIFICATION FOR DEADBREAK ELBOW 12/20 (24 kV) (SCREENED SEPARABLE INSULATED CONNECTOR FOR XLPE-INSULATED CABLES)
Technical Code: EDMS 13-101-1
Issued Date: 16/11/2021
SPECIFICATION FOR DEADBREAK ELBOW 12/20 (24 kV) (SCREENED SEPARABLE INSULATED CONNECTOR FOR XLPE-INSULATED CABLES)
-
EDMS 13-200-2 TECHNICAL SPECIFICATION FOR CABLE TERMINATION FOR XLPE INSULATEDCABLES 18/30 (36) kV (indoor and outdoor)
Technical Code: EDMS 13-200-2
Issued Date: 24/01/2023
TECHNICAL SPECIFICATION FOR CABLE TERMINATION FOR XLPE INSULATEDCABLES 18/30 (36) kV (indoor and outdoor)
-
EDMS 13-201-1 SPECIFICATION FOR DEADBREAK ELBOW 18/30 (36 kV) (SCREENED SEPARABLE INSULATED CONNECTOR FOR XLPE-INSULATED CABLES)
Technical Code: EDMS 13-201-1
Issued Date: 16/11/2021
SPECIFICATION FOR DEADBREAK ELBOW 18/30 (36 kV) (SCREENED SEPARABLE INSULATED CONNECTOR FOR XLPE-INSULATED CABLES)
EDMS 13-201-1 SPECIFICATION FOR DEADBREAK ELBOW 18/30 (36 kV) (SCREENED SEPARABLE INSULATED CONNECTOR FOR XLPE-INSULATED CABLES) تحميل
This specification describes the minimum technical requirements for design,
manufacturing, testing, inspection, packing, and delivery of deadbreak elbow connectors
(screened separable insulated connectors). The required elbows are intended to suit
18/30 (36 kV) cables inside the medium voltage distribution networks of the Egyptian
Electricity Distribution Companies (EDCs). This specification covers both (L-shape)
and (T-shape) elbows. The required elbows are suitable to be used with XLPE-insulation
power cables of different constructions:
Three core and single core.
Armored and non-armored.
Copper and Aluminum conductors.
Conductors of CSA up to 400 mm2
.
The materials of the elbow shall be compatible with the materials of the cables.
Unless otherwise specified by _ _ EDC, the elbow bushing is outside cone interface
type (C1), bolted screw type of up to 630 A in compliance to EN 50181.