المواصفات الفنية لمهمات شبكات التوزيع
- 01 - الموزعات
- 02 - لوحات الجهد المتوسط والمنخفض
- 03 - كابلات
- 04 - موصلات
- 06 - كابلات جهد منخفض احادية معزولة
- 07 - اكشاك
- 08 - محولات
- 09 - أعمدة
- 10 - عازلات
- 11 - مانعات الصواعق
- 12 - منظمات الجهد
- 13 - نهايات
- 14 - وصلات
- 15 -ملحقات كابلات
- 17 - محولات التيار والجهد
- 18 - ملحقات هوائية
- 19 - قواطع تيار
- 20 - العدادات
- 21 - مكثفات
- 22 - لمبات وكشافات
- 23-EESS& مولدات
- 24 - طاقة شمسية
- 25 - ملحقات المحولات
- 26 - مقاوم التأريض المحايد
- 27 - شواحن بطاريات
- 28 - عدد وأدوات
- 29 - مواد الحماية
- 30-مهمات السلامة والصحة المهنية
- 32- اجهزة تحليل الطاقة
14 - وصلات
-
EDMS 14-100-1 TECHNICAL SPECIFICATION FOR CABLE JOINTS FOR XLPE INSULATED CABLES 12/20 (24) kV (ARMOURED AND NON ARMOURED)
Technical Code: EDMS 14-100-1
Issued Date: 09/03/2020
TECHNICAL SPECIFICATION FOR CABLE JOINTS FOR XLPE INSULATED CABLES 12/20 (24) kV (ARMOURED AND NON ARMOURED)
-
EDMS 14-200-1 TECHNICAL SPECIFICATION FOR CABLE JOINTS FOR XLPE INSULATED CABLES 18/30 (36) kV (ARMOURED AND NON ARMOURED)
Technical Code: EDMS 14-200-1
Issued Date: 09/03/2020
TECHNICAL SPECIFICATION FOR CABLE JOINTS FOR XLPE INSULATED CABLES 18/30 (36) kV (ARMOURED AND NON ARMOURED)
-
EDMS 14-300-1 TECHNICAL SPECIFICATIONS FOR LOW VOLTAGE HEAT SHRINKABLE CABLE JOINTS 0.6/1(1.2) kV
Technical Code: EDMS 14-300-1
Issued Date: 01/03/2022
TECHNICAL SPECIFICATIONS FOR LOW VOLTAGE HEAT SHRINKABLE CABLE JOINTS 0.6/1(1.2) kV
EDMS 14-200-1 TECHNICAL SPECIFICATION FOR CABLE JOINTS FOR XLPE INSULATED CABLES 18/30 (36) kV (ARMOURED AND NON ARMOURED) تحميل
This specification covers the minimum technical requirements for design,
engineering, manufacture, testing, inspection, installation and performance of all kinds
of straight through joints for medium voltage power cables, XLPE insulation, with the
following different constructions:
● Three core and single core
● Armoured and non armoured
● Copper and aluminum conductors
- The joint for the level of 22 kV system (18/30 kV cable) should meet the
requirements of the 36 kV Level.
- The Joint kits should be supplied completely with all relevant components
- Unless otherwise specified Joints should comply with all relevant standards
described