المواصفات الفنية لمهمات شبكات التوزيع
- 01 - SWITCH BOARD (X) PANELS
- 02 - RMU &L.V PANELS
- 03 - MV / L.V UNDERGROUND CABLES
- 04 - CONDUCTORS
- 06 -SINGLE CORE PVC INSULATED CABLES/WIRES 450/750 V
- 07 - KIOSKS
- 08 - TRANSFORMERS
- 09 - POLES &TOWERS
- 10 - INSULATORS
- 11 - SURGE ARRESTER
- 12 - VOLTAGE REGULATORS
- 13 - TERMINATIONS
- 14 - JOINTS
- 15 - LUGS&BTS
- 17 - CURRENT &VOLTAGE TRANSFORMERS
- 18 - ACCESSORIES
- 19 - LOW VOLTAGE CIRCUIT BREAKER AND FUSES
- 20 - METERS
- 21 - CAPACITORS
- 22 - TUBE &OUT DOOR LED LUMINARIES
- 23-EESS& GENERATORS
- 24 - PHOTOVOLTAIC SYSTEM
- 25 -TRANSFORMERS FITTINGS
- 26 - EARTHING TOOLS
- 27 - BATTERY CHARGERS
- 28 - TOOLS & EQUIPMENTS
- 29 - COATING MATERIALS
- 30- SAFETY AND PERSONAL PROTECTIVE,HEALTHY EQUIPMENTS ,
- 31-أجهزة اختبار الكابلات CABLE TESTING EQUIPMENT
- 32- اجهزة INSTRUMENTS
14 - JOINTS
-
EDMS 14-300-1 TECHNICAL SPECIFICATIONS FOR LOW VOLTAGE HEAT SHRINKABLE CABLE JOINTS 0.6/1(1.2) kV
Technical Code: EDMS 14-300-1
Issued Date: 01/03/2022
TECHNICAL SPECIFICATIONS FOR LOW VOLTAGE HEAT SHRINKABLE CABLE JOINTS 0.6/1(1.2) kV
-
pg. 1 EDMS 14-100-2 SPECIFICATION FOR CABLE JOINTS FOR XLPE INSULATED CABLES 12/20 (24) kV (ARMOURED AND NON ARMOURED)
Technical Code: EDMS 14-100-2
Issued Date: 13/05/2025
SPECIFICATION FOR CABLE JOINTS FOR XLPE INSULATED CABLES 12/20 (24) kV (ARMOURED AND NON ARMOURED)
-
EDMS 14-200-2 SPECIFICATION FOR CABLE JOINTS FOR XLPE INSULATED CABLES 18/30 (36) kV (ARMOURED AND NON ARMOURED)
Technical Code: EDMS 14-200-2
Issued Date: 13/05/2025
SPECIFICATION FOR CABLE JOINTS FOR XLPE INSULATED CABLES 18/30 (36) kV (ARMOURED AND NON ARMOURED)
EDMS 14-300-1 TECHNICAL SPECIFICATIONS FOR LOW VOLTAGE HEAT SHRINKABLE CABLE JOINTS 0.6/1(1.2) kV تحميل
إسم المواصفة
TECHNICAL SPECIFICATIONS FOR LOW VOLTAGE HEAT SHRINKABLE CABLE JOINTS 0.6/1(1.2) kV
كود المواصفة
EDMS 14-300-1
تاريخ الإصدار
01/03/2022
تاريخ الإنتهاء
غير محدد
التوصيف
TECHNICAL SPECIFICATIONS FOR LOW VOLTAGE HEAT SHRINKABLE CABLE JOINTS 0.6/1(1.2) kV
التفاصيل
This specification covers the minimum technical requirements for design, engineering,
manufacture, testing, inspection, installation and performance of all kinds of straight through joints
for low voltage power cables of 1 kV level system, XLPE insulation, 0.6/1 (1.2) kV with the
following different constructions and sizes:
Single/Three cores with neutral core.
Armoured and non armoured.
Copper and aluminum conductors.