المواصفات الفنية لمهمات شبكات التوزيع
- 01 - الموزعات
- 02 - لوحات الجهد المتوسط والمنخفض
- 03 - كابلات
- 04 - موصلات
- 06 - كابلات جهد منخفض احادية معزولة
- 07 - اكشاك
- 08 - محولات
- 09 - أعمدة
- 10 - عازلات
- 11 - مانعات الصواعق
- 12 - منظمات الجهد
- 13 - نهايات
- 14 - وصلات
- 15 -ملحقات كابلات
- 17 - محولات التيار والجهد
- 18 - ملحقات هوائية
- 19 - قواطع تيار
- 20 - العدادات
- 21 - مكثفات
- 22 - لمبات وكشافات
- 23-EESS& مولدات
- 24 - طاقة شمسية
- 25 - ملحقات المحولات
- 26 - مقاوم التأريض المحايد
- 27 - شواحن بطاريات
- 28 - عدد وأدوات
- 29 - مواد الحماية
- 30-مهمات السلامة والصحة المهنية
- 32- اجهزة تحليل الطاقة
20 - العدادات
-
EDMS 20-300-1 TECHNICAL SPECIFICATIONS FOR SINGLE- PHASE-PREPAID KWH DIGITAL METERS
Technical Code: EDMS 20-300-1
Issued Date: 21/03/2019
TECHNICAL SPECIFICATIONS FOR SINGLE- PHASE-PREPAID KWH DIGITAL METERS
-
EDMS 20-301-1 TECHNICAL SPECIFICATIONS FOR THREE PHASE PREPAID KWH DIGITAL METERS
Technical Code: EDMS 20-301-1
Issued Date: 23/05/2018
TECHNICAL SPECIFICATIONS FOR THREE PHASE PREPAID KWH DIGITAL METERS
-
EDMS 20-303-2 TECHNICAL SPECIFICATION FOR SINGLE PHASE DIRECT SMART METER
Technical Code: EDMS 20-303-2
Issued Date: 17/08/2021
TECHNICAL SPECIFICATION FOR SINGLE PHASE DIRECT SMART METER
-
EDMS 20-304-2 TECHNICAL SPECIFICATION FOR THREE PHASE DIRECT SMART METER
Technical Code: EDMS 20-304-2
Issued Date: 17/08/2021
TECHNICAL SPECIFICATION FOR THREE PHASE DIRECT SMART METER
-
EDMS 20-305-2 SPECIFICATION FOR THREE-PHASE INDIRECT SMART METER
Technical Code: EDMS 20-305-2
Issued Date: 23/11/2021
SPECIFICATION FOR THREE-PHASE INDIRECT SMART METER
-
EDMS 20-306-1 TECHNICAL SPECIFICATION FOR THREE PHASE BULK SMART METER
Technical Code: EDMS 20-306-1
Issued Date: 23/11/2021
TECHNICAL SPECIFICATION FOR THREE PHASE BULK SMART METER
-
EDMS 20-307-04 دليل إختباراث العداداث اإللكترونيه أحاديه الىجه مسبقه الدفع
Technical Code: EDMS 20-307-04
Issued Date: 17/06/2021
دليل إختباراث العداداث الالكترونية أحاديه الوجه مسبقه الدفع
-
EDMS 20-401-1 TECHNICAL SPECIFICATION FOR MEDUIM VOLTAGE SMART METER
Technical Code: EDMS 20-401-1
Issued Date: 10/02/2021
TECHNICAL SPECIFICATION FOR MEDUIM VOLTAGE SMART METER
-
EDMS 20-402-2 SPECIFICATION FOR Meter Enclosures
Technical Code: EDMS 20-402-2
Issued Date: 12/10/2021
-
EDMS 20-500-1 TECHNICAL SPECIFICATION FOR HEAD END SYSTEM
Technical Code: EDMS 20-500-1
Issued Date: 18/02/2021
TECHNICAL SPECIFICATION FOR HEAD END SYSTEM
-
EDMS 20-501-2 TECHNICAL SPECIFICATION FOR DATA CONCENTRATOR
Technical Code: EDMS 20-501-2
Issued Date: 12/12/2021
EDMS 20-501-2 TECHNICAL SPECIFICATION FOR DATA CONCENTRATOR
-
EDMS 20-503 - 02 SPECIFICATION FOR AUTOMATIC 3-PHASE METER TESTING EQUIPMENT
Technical Code: EDMS 20-503 - 01
Issued Date: 29/11/2023
This specification describes the minimum technical requirements for designing, manufacturing, testing, inspection, supply and delivery of Automatic 3-Phase Meter Testing Equipment “calibration purposes”.
-
EDMS 20-504-1 TECHNICAL SPECIFICATION FOR AUTOMATIC SINGLE PHASE TESTING EQUIPMENTS
Technical Code: EDMS 20-504-1
Issued Date: 13/12/2023
This specification applies to stationary meter test units (MTUs) permanently installed in EDC laboratories’ used for testing and calibration of electricity meters, in particular for their type test, acceptance test and verification test. It covers the requirements for automatic MTUs for indoor laboratory application and applies to newly manufactured MTUs to test electricity meters on 50 Hz networks with an AC voltage up to 600 V (phase to neutral).
EDMS 20-402-2 SPECIFICATION FOR Meter Enclosures تحميل
This Enclosures Specification covers manufacturing, testing, and supply of Meter Enclosures for three-phase
direct connected meters.
a- The Meter Enclosure shall be made of insulating material intended to contain meters to be installed
on walls or similar flat surface structures and include a Miniature Circuit Breaker (MCB).
b- The Meter Enclosure shall be weather proof and ultraviolet resistant (to within type test limits, at
minimum).
c- The Meter Enclosure will be supplied with the MCB and the MCB will be mounted inside the Meter
Enclosure in such a way as to permit access to the MCB lever without opening the Meter
Enclosure cover.
d- The Meter Enclosures shall be compatible with the supplied Smart Meter case dimensions for the
required installation configurations