المواصفات الفنية لمهمات شبكات التوزيع
- 01 - الموزعات
- 02 - لوحات الجهد المتوسط والمنخفض
- 03 - كابلات
- 04 - موصلات
- 06 - كابلات جهد منخفض احادية معزولة
- 07 - اكشاك
- 08 - محولات
- 09 - أعمدة
- 10 - عازلات
- 11 - مانعات الصواعق
- 12 - منظمات الجهد
- 13 - نهايات
- 14 - وصلات
- 15 -ملحقات كابلات
- 17 - محولات التيار والجهد
- 18 - ملحقات هوائية
- 19 - قواطع تيار
- 20 - العدادات
- 21 - مكثفات
- 22 - لمبات وكشافات
- 23-EESS& مولدات
- 24 - طاقة شمسية
- 25 - ملحقات المحولات
- 26 - مقاوم التأريض المحايد
- 27 - شواحن بطاريات
- 28 - عدد وأدوات
- 29 - مواد الحماية
- 30-مهمات السلامة والصحة المهنية
- 32- اجهزة تحليل الطاقة
20 - العدادات
-
EDMS 20-300-1 TECHNICAL SPECIFICATIONS FOR SINGLE- PHASE-PREPAID KWH DIGITAL METERS
Technical Code: EDMS 20-300-1
Issued Date: 21/03/2019
TECHNICAL SPECIFICATIONS FOR SINGLE- PHASE-PREPAID KWH DIGITAL METERS
-
EDMS 20-301-1 TECHNICAL SPECIFICATIONS FOR THREE PHASE PREPAID KWH DIGITAL METERS
Technical Code: EDMS 20-301-1
Issued Date: 23/05/2018
TECHNICAL SPECIFICATIONS FOR THREE PHASE PREPAID KWH DIGITAL METERS
-
EDMS 20-303-2 TECHNICAL SPECIFICATION FOR SINGLE PHASE DIRECT SMART METER
Technical Code: EDMS 20-303-2
Issued Date: 17/08/2021
TECHNICAL SPECIFICATION FOR SINGLE PHASE DIRECT SMART METER
-
EDMS 20-304-2 TECHNICAL SPECIFICATION FOR THREE PHASE DIRECT SMART METER
Technical Code: EDMS 20-304-2
Issued Date: 17/08/2021
TECHNICAL SPECIFICATION FOR THREE PHASE DIRECT SMART METER
-
EDMS 20-305-2 SPECIFICATION FOR THREE-PHASE INDIRECT SMART METER
Technical Code: EDMS 20-305-2
Issued Date: 23/11/2021
SPECIFICATION FOR THREE-PHASE INDIRECT SMART METER
-
EDMS 20-306-1 TECHNICAL SPECIFICATION FOR THREE PHASE BULK SMART METER
Technical Code: EDMS 20-306-1
Issued Date: 23/11/2021
TECHNICAL SPECIFICATION FOR THREE PHASE BULK SMART METER
-
EDMS 20-307-04 دليل إختباراث العداداث اإللكترونيه أحاديه الىجه مسبقه الدفع
Technical Code: EDMS 20-307-04
Issued Date: 17/06/2021
دليل إختباراث العداداث الالكترونية أحاديه الوجه مسبقه الدفع
-
EDMS 20-401-1 TECHNICAL SPECIFICATION FOR MEDUIM VOLTAGE SMART METER
Technical Code: EDMS 20-401-1
Issued Date: 10/02/2021
TECHNICAL SPECIFICATION FOR MEDUIM VOLTAGE SMART METER
-
EDMS 20-402-2 SPECIFICATION FOR Meter Enclosures
Technical Code: EDMS 20-402-2
Issued Date: 12/10/2021
-
EDMS 20-500-1 TECHNICAL SPECIFICATION FOR HEAD END SYSTEM
Technical Code: EDMS 20-500-1
Issued Date: 18/02/2021
TECHNICAL SPECIFICATION FOR HEAD END SYSTEM
-
EDMS 20-501-2 TECHNICAL SPECIFICATION FOR DATA CONCENTRATOR
Technical Code: EDMS 20-501-2
Issued Date: 12/12/2021
EDMS 20-501-2 TECHNICAL SPECIFICATION FOR DATA CONCENTRATOR
-
EDMS 20-503 - 02 SPECIFICATION FOR AUTOMATIC 3-PHASE METER TESTING EQUIPMENT
Technical Code: EDMS 20-503 - 01
Issued Date: 29/11/2023
This specification describes the minimum technical requirements for designing, manufacturing, testing, inspection, supply and delivery of Automatic 3-Phase Meter Testing Equipment “calibration purposes”.
-
EDMS 20-504-1 TECHNICAL SPECIFICATION FOR AUTOMATIC SINGLE PHASE TESTING EQUIPMENTS
Technical Code: EDMS 20-504-1
Issued Date: 13/12/2023
This specification applies to stationary meter test units (MTUs) permanently installed in EDC laboratories’ used for testing and calibration of electricity meters, in particular for their type test, acceptance test and verification test. It covers the requirements for automatic MTUs for indoor laboratory application and applies to newly manufactured MTUs to test electricity meters on 50 Hz networks with an AC voltage up to 600 V (phase to neutral).
EDMS 20-306-1 TECHNICAL SPECIFICATION FOR THREE PHASE BULK SMART METER تحميل
Many important business processes conducted by the electricity distribution companies
(EDCs) require re-engineering to increase effectiveness and efficiency. An important
enabler for this re-engineering is an advanced metering infrastructure (AMI). The
functionality of the AMI can contribute to the business needs identified by EEHC. Smart
meters is the key role in AMI. Smart meters shall communicate using field area network
(FAN) telecommunications technologies such as PLC, PLC/RF, mobile wireless service
2G/3G / 4G technology, and RS 485. The choice of FAN telecommunication technology
shall optimize system design, architecture, interoperability and total cost of ownership
while meeting this specification.
This specification describes the minimum technical requirements for designing,
manufacturing, testing, inspection, supply and delivery of three-phase indirect smart
meters. The required meters shall be suitable for outdoor installations of the power
networks of _ _EDC.