المواصفات الفنية لمهمات شبكات التوزيع
- 01 - الموزعات SWITCH BOARD (X) PANELS
- 02 - لوحات الجهد المتوسط والمنخفض RMU &L.V PANELS
- 03 - كابلات MV / L.V UNDERGROUND CABLES
- 04 - موصلات CONDUCTORS
- 06 - اسلاكSINGLE CORE PVC INSULATED CABLES/WIRES 450/750 V
- 07 - اكشاك KIOSKS
- 08 - محولات TRANSFORMERS
- 09 - أعمدة POLES &TOWERS
- 10 - عازلات INSULATORS
- 11 - مانعات الصواعق SURGE ARRESTER
- 12 - منظمات الجهد VOLTAGE REGULATORS
- 13 - نهايات CONNECTORS
- 14 - وصلات
- 15 -ملحقات كابلات LUGS&BTS
- 17 - محولات التيار والجهد CURRENT &VOLTAGE TRANSFORMERS
- 18 - ملحقات هوائية ACCESSORIES
- 19 - قواطع تيار LOW VOLTAGE CIRCUIT BREAKER AND FUSES
- 20 - العدادات METERS
- 21 - مكثفات CAPACITORS
- 22 - لمبات وكشافات TUBE &OUT DOOR LED LUMINARIES
- 23-EESS& مولدات GENERATORS
- 24 - طاقة شمسية PHOTOVOLTAIC SYSTEM
- 25 - ملحقات المحولات
- 26 - مقاوم التأريض المحايد EARTHING TOOLS
- 27 - شواحن بطاريات BATTERY CHARGERS
- 28 - عدد وأدوات TOOLS & EQUIPMENTS
- 29 - مواد الحماية COATING MATERIALS
- 30-مهمات السلامة والصحة المهنية SAFETY AND PERSONAL PROTECTIVE,HEALTHY EQUIPMENTS ,
- 31-أجهزة اختبار الكابلات CABLE TESTING EQUIPMENT
- 32- اجهزة INSTRUMENTS
08 - محولات TRANSFORMERS
-
EDMS 08-100-5 SPECIFICATION FOR OIL-IMMERSED DISTRIBUTION TRANSFORMERS FROM 25 kVA UP TO 5000 kVA 10.5 - 11 / 0.4 kV
Technical Code: EDMS 08-100-5
Issued Date: 05/11/2024
SPECIFICATION FOR OIL-IMMERSED DISTRIBUTION TRANSFORMERS FROM 25 kVA UP TO 5000 kVA 10.5 - 11 / 0.4 kV
-
EDMS 08-101-3 SPECIFICATION FOR DRY-TYPE DISTRIBUTION TRANSFORMERS FROM 50 kVA UP TO 5000 kVA 10.5 – 11 / 0.4 kV EPOXY SOLID-CAST / CAST RESIN COIL
Technical Code: EDMS 08-101-3
Issued Date: 08/08/2021
SPECIFICATION FOR DRY-TYPE DISTRIBUTION TRANSFORMERS FROM 50 kVA UP TO 5000 kVA 10.5 – 11 / 0.4 kV EPOXY SOLID-CAST / CAST RESIN COIL
-
EDMS 08-102-2 TECHNICAL SPECIFICATION FOR EPOXY SOLID-CAST/VPE OR CAST COIL DRY - TYPE DISTRIBUTION TRANSFORMERs 10.5-11/0.4 KV 50 KVA up to 5000 KVA
Technical Code: EDMS 08-102-2
Issued Date: 08/08/2023
TECHNICAL SPECIFICATION FOR EPOXY SOLID-CAST/VPE OR CAST COIL DRY - TYPE DISTRIBUTION TRANSFORMERs 10.5-11/0.4 KV 50 KVA up to 5000 KVA
-
EDMS 08-200-5 SPECIFICATION FOR OIL-IMMERSED DISTRIBUTION TRANSFORMERS FROM 25 kVA UP TO 5000 kVA 22 / 0.4 kV
Technical Code: EDMS 08-200-5
Issued Date: 05/11/2024
SPECIFICATION FOR OIL-IMMERSED DISTRIBUTION TRANSFORMERS FROM 25 kVA UP TO 5000 kVA 22 / 0.4 kV
-
EDMS 08-201-3 SPECIFICATION FOR DRY-TYPE DISTRIBUTION TRANSFORMERS FROM 50 kVA UP TO 5000 kVA 22 / 0.4 kV EPOXY SOLID-CAST / CAST RESIN COIL
Technical Code: EDMS 08-201-3
Issued Date: 08/08/2021
SPECIFICATION FOR DRY-TYPE DISTRIBUTION TRANSFORMERS FROM 50 kVA UP TO 5000 kVA 22 / 0.4 kV EPOXY SOLID-CAST / CAST RESIN COIL
-
EDMS 08-103-1 TECHNICAL SPECIFICATION FOR CAST /PRE-IMPREGNATED DRY - TYPE DISTRIBUTION TRANSFORMERS 10.5-11/0.4 KV 50 KVA up to 5000 KVA
Technical Code: EDMS 08-103-1
Issued Date: 01/01/0001
This specification covers the minimum technical requirements for design, engineering, manufacturing, testing, inspection, supply, delivery, packing, and installation, of three-phase solidcast resin/pre-impregnated coil (10.5-11/0.4KV) dry-type transformers for indoor installations for 50 HZ rated frequency network
-
EDMS 08-400-02 SPECIFICATION FOR Oil Immersed Coupling Power Transformers
Technical Code: EDMS 08-400-02
Issued Date: 01/10/2024
This specification covers the general requirements of design, manufacture, testing, supply and delivery of (22/11 KV or 11/22 KV), three-phase, two-windings oil immersed (Step-up or Step-down) power transformers with on load tap changer and local / remote tap change control panels rated up to 30 MVA at (ONAN/ONAF) Cooling. The transformers shall be suitable for indoor /outdoor installations of the power networks of Egyptian Electricity Distribution Companies (…EDCs).
EDMS 08-200-5 SPECIFICATION FOR OIL-IMMERSED DISTRIBUTION TRANSFORMERS FROM 25 kVA UP TO 5000 kVA 22 / 0.4 kV تحميل
This specification specifies the minimum technical requirements for design, manufacturing,
testing, inspection, supply and delivery of three-phase conventional or hermetically sealed,
two-winding oil-immersed distribution transformers. The required transformers are stepdown transformers to convert the medium voltage level (22 kV) into low voltage level 0.4
kV. The transformers shall be suitable for indoor /outdoor installations of the power networks
of Egyptian Electricity Distribution Companies (EDCs).