المواصفات الفنية لمهمات شبكات التوزيع
- 01 - الموزعات SWITCH BOARD (X) PANELS
- 02 - لوحات الجهد المتوسط والمنخفض RMU &L.V PANELS
- 03 - كابلات MV / L.V UNDERGROUND CABLES
- 04 - موصلات CONDUCTORS
- 06 - اسلاكSINGLE CORE PVC INSULATED CABLES/WIRES 450/750 V
- 07 - اكشاك KIOSKS
- 08 - محولات TRANSFORMERS
- 09 - أعمدة POLES &TOWERS
- 10 - عازلات INSULATORS
- 11 - مانعات الصواعق SURGE ARRESTER
- 12 - منظمات الجهد VOLTAGE REGULATORS
- 13 - نهايات CONNECTORS
- 14 - وصلات
- 15 -ملحقات كابلات LUGS&BTS
- 17 - محولات التيار والجهد CURRENT &VOLTAGE TRANSFORMERS
- 18 - ملحقات هوائية ACCESSORIES
- 19 - قواطع تيار LOW VOLTAGE CIRCUIT BREAKER AND FUSES
- 20 - العدادات METERS
- 21 - مكثفات CAPACITORS
- 22 - لمبات وكشافات TUBE &OUT DOOR LED LUMINARIES
- 23-EESS& مولدات GENERATORS
- 24 - طاقة شمسية PHOTOVOLTAIC SYSTEM
- 25 - ملحقات المحولات
- 26 - مقاوم التأريض المحايد EARTHING TOOLS
- 27 - شواحن بطاريات BATTERY CHARGERS
- 28 - عدد وأدوات TOOLS & EQUIPMENTS
- 29 - مواد الحماية COATING MATERIALS
- 30-مهمات السلامة والصحة المهنية SAFETY AND PERSONAL PROTECTIVE,HEALTHY EQUIPMENTS ,
- 31-أجهزة اختبار الكابلات CABLE TESTING EQUIPMENT
- 32- اجهزة INSTRUMENTS
13 - نهايات CONNECTORS
-
EDMS 13-100-2 TECHNICAL SPECIFICATION FOR CABLE TERMINATION FOR XLPE INSULATED CABLES 12/20 (24) kV (Indoor and outdoor)
Technical Code: EDMS 13-100-2
Issued Date: 24/01/2023
TECHNICAL SPECIFICATION FOR CABLE TERMINATION FOR XLPE INSULATED CABLES 12/20 (24) kV (Indoor and outdoor)
-
EDMS 13-101-1 SPECIFICATION FOR DEADBREAK ELBOW 12/20 (24 kV) (SCREENED SEPARABLE INSULATED CONNECTOR FOR XLPE-INSULATED CABLES)
Technical Code: EDMS 13-101-1
Issued Date: 16/11/2021
SPECIFICATION FOR DEADBREAK ELBOW 12/20 (24 kV) (SCREENED SEPARABLE INSULATED CONNECTOR FOR XLPE-INSULATED CABLES)
-
EDMS 13-200-2 TECHNICAL SPECIFICATION FOR CABLE TERMINATION FOR XLPE INSULATEDCABLES 18/30 (36) kV (indoor and outdoor)
Technical Code: EDMS 13-200-2
Issued Date: 24/01/2023
TECHNICAL SPECIFICATION FOR CABLE TERMINATION FOR XLPE INSULATEDCABLES 18/30 (36) kV (indoor and outdoor)
-
EDMS 13-201-1 SPECIFICATION FOR DEADBREAK ELBOW 18/30 (36 kV) (SCREENED SEPARABLE INSULATED CONNECTOR FOR XLPE-INSULATED CABLES)
Technical Code: EDMS 13-201-1
Issued Date: 16/11/2021
SPECIFICATION FOR DEADBREAK ELBOW 18/30 (36 kV) (SCREENED SEPARABLE INSULATED CONNECTOR FOR XLPE-INSULATED CABLES)
EDMS 13-100-2 TECHNICAL SPECIFICATION FOR CABLE TERMINATION FOR XLPE INSULATED CABLES 12/20 (24) kV (Indoor and outdoor) تحميل
This specification covers the minimum technical requirements for design,
engineering, manufacture, testing, inspection, installation and performance of all
kinds of terminations for medium voltage power cables, XLPE insulation, with the
following different constructions:
● Three core and single core
● Indoor and outdoor
● Copper and aluminum conductors
- The termination for the level of 11kV system (12/20 kV cable) should meet the
requirements of the 24kV Level.