المواصفات الفنية لمهمات شبكات التوزيع

13 - نهايات CONNECTORS

EDMS 13-201-1 SPECIFICATION FOR DEADBREAK ELBOW 18/30 (36 kV) (SCREENED SEPARABLE INSULATED CONNECTOR FOR XLPE-INSULATED CABLES) تحميل

إسم المواصفة
SPECIFICATION FOR DEADBREAK ELBOW 18/30 (36 kV) (SCREENED SEPARABLE INSULATED CONNECTOR FOR XLPE-INSULATED CABLES)
كود المواصفة
EDMS 13-201-1
تاريخ الإصدار
16/11/2021
تاريخ الإنتهاء
غير محدد
التوصيف
SPECIFICATION FOR DEADBREAK ELBOW 18/30 (36 kV) (SCREENED SEPARABLE INSULATED CONNECTOR FOR XLPE-INSULATED CABLES)
التفاصيل

This specification describes the minimum technical requirements for design,
manufacturing, testing, inspection, packing, and delivery of deadbreak elbow connectors
(screened separable insulated connectors). The required elbows are intended to suit
18/30 (36 kV) cables inside the medium voltage distribution networks of the Egyptian
Electricity Distribution Companies (EDCs). This specification covers both (L-shape)
and (T-shape) elbows. The required elbows are suitable to be used with XLPE-insulation
power cables of different constructions:
 Three core and single core.
 Armored and non-armored.
 Copper and Aluminum conductors.
 Conductors of CSA up to 400 mm2
.
 The materials of the elbow shall be compatible with the materials of the cables.
 Unless otherwise specified by _ _ EDC, the elbow bushing is outside cone interface
type (C1), bolted screw type of up to 630 A in compliance to EN 50181.

تحميل المواصفة