المواصفات الفنية لمهمات شبكات التوزيع
- 01 - SWITCH BOARD (X) PANELS
- 02 - RMU &L.V PANELS
- 03 - MV / L.V UNDERGROUND CABLES
- 04 - CONDUCTORS
- 06 -SINGLE CORE PVC INSULATED CABLES/WIRES 450/750 V
- 07 - KIOSKS
- 08 - TRANSFORMERS
- 09 - POLES &TOWERS
- 10 - INSULATORS
- 11 - SURGE ARRESTER
- 12 - VOLTAGE REGULATORS
- 13 - TERMINATIONS
- 14 - JOINTS
- 15 - LUGS&BTS
- 17 - CURRENT &VOLTAGE TRANSFORMERS
- 18 - ACCESSORIES
- 19 - LOW VOLTAGE CIRCUIT BREAKER AND FUSES
- 20 - METERS
- 21 - CAPACITORS
- 22 - TUBE &OUT DOOR LED LUMINARIES
- 23-EESS& GENERATORS
- 24 - PHOTOVOLTAIC SYSTEM
- 25 -TRANSFORMERS FITTINGS
- 26 - EARTHING TOOLS
- 27 - BATTERY CHARGERS
- 28 - TOOLS & EQUIPMENTS
- 29 - COATING MATERIALS
- 30- SAFETY AND PERSONAL PROTECTIVE,HEALTHY EQUIPMENTS ,
- 31-أجهزة اختبار الكابلات CABLE TESTING EQUIPMENT
- 32- اجهزة INSTRUMENTS
18 - ACCESSORIES
-
EDMS 18-301-1 SPECIFICATION FOR Low voltage insulation fittings
Technical Code: EDMS 18-301-1
Issued Date: 30/08/2018
SPECIFICATION FOR Low voltage insulation fittings
-
EDMS 18- 400 - 2 SPECIFICATION FOR Tension set assembly For M.V. overhead network ( 4 - BOLT TYPE)
Technical Code: EDMS 18- 400 - 2
Issued Date: 10/12/2018
SPECIFICATION FOR Tension set assembly For M.V. overhead network ( 4 - BOLT TYPE)
-
EDMS 18- 401 - 2 SPECIFICATION FOR Tension set assembly For M.V. overhead network ( 3 - BOLT TYPE)
Technical Code: EDMS 18- 401 - 1
Issued Date: 28/06/2022
SPECIFICATION FOR Tension set assembly For M.V. overhead network ( 3 - BOLT TYPE)
-
EDMS 18-402-1 SPECIFICATION FOR OVER-HEAD ACCESSORIES OF BARE CONDUCTORS
Technical Code: EDMS 18-402-1
Issued Date: 14/01/2025
This specification describes the minimum technical requirements for the design, engineering, manufacture, testing, supply and delivery of accessories used with overhead distribution line. These accessories include: mid-span compression joint, parallel grove clamp and top tie. This required accessories shall be compatible with bare conductors that carry electrical power up to 24 kV. The required accessories shall be suitable for use in outdoor installations of the Egyptian Electricity Distribution Companies (EDCs).
EDMS 18-402-1 SPECIFICATION FOR OVER-HEAD ACCESSORIES OF BARE CONDUCTORS تحميل
إسم المواصفة
SPECIFICATION FOR OVER-HEAD ACCESSORIES OF BARE CONDUCTORS
كود المواصفة
EDMS 18-402-1
تاريخ الإصدار
14/01/2025
تاريخ الإنتهاء
غير محدد
التوصيف
This specification describes the minimum technical requirements for the design,
engineering, manufacture, testing, supply and delivery of accessories used with overhead distribution line. These accessories include: mid-span compression joint, parallel
grove clamp and top tie. This required accessories shall be compatible with bare
conductors that carry electrical power up to 24 kV. The required accessories shall be
suitable for use in outdoor installations of the Egyptian Electricity Distribution
Companies (EDCs).
التفاصيل