المواصفات الفنية لمهمات شبكات التوزيع
- 01 - الموزعات
- 02 - لوحات الجهد المتوسط والمنخفض
- 03 - كابلات
- 04 - موصلات
- 06 - كابلات جهد منخفض احادية معزولة
- 07 - اكشاك
- 08 - محولات
- 09 - أعمدة
- 10 - عازلات
- 11 - مانعات الصواعق
- 12 - منظمات الجهد
- 13 - نهايات
- 14 - وصلات
- 15 -ملحقات كابلات
- 17 - محولات التيار والجهد
- 18 - ملحقات هوائية
- 19 - قواطع تيار
- 20 - العدادات
- 21 - مكثفات
- 22 - لمبات وكشافات
- 23-EESS& مولدات
- 24 - طاقة شمسية
- 25 - ملحقات المحولات
- 26 - مقاوم التأريض المحايد
- 27 - شواحن بطاريات
- 28 - عدد وأدوات
- 29 - مواد الحماية
- 30-مهمات السلامة والصحة المهنية
- 32- اجهزة تحليل الطاقة
08 - محولات
-
EDMS 08-100-5 SPECIFICATION FOR OIL-IMMERSED DISTRIBUTION TRANSFORMERS FROM 25 kVA UP TO 5000 kVA 10.5 - 11 / 0.4 kV
Technical Code: EDMS 08-100-5
Issued Date: 05/11/2024
SPECIFICATION FOR OIL-IMMERSED DISTRIBUTION TRANSFORMERS FROM 25 kVA UP TO 5000 kVA 10.5 - 11 / 0.4 kV
-
EDMS 08-101-3 SPECIFICATION FOR DRY-TYPE DISTRIBUTION TRANSFORMERS FROM 50 kVA UP TO 5000 kVA 10.5 – 11 / 0.4 kV EPOXY SOLID-CAST / CAST RESIN COIL
Technical Code: EDMS 08-101-3
Issued Date: 08/08/2021
SPECIFICATION FOR DRY-TYPE DISTRIBUTION TRANSFORMERS FROM 50 kVA UP TO 5000 kVA 10.5 – 11 / 0.4 kV EPOXY SOLID-CAST / CAST RESIN COIL
-
EDMS 08-102-2 TECHNICAL SPECIFICATION FOR EPOXY SOLID-CAST/VPE OR CAST COIL DRY - TYPE DISTRIBUTION TRANSFORMERs 10.5-11/0.4 KV 50 KVA up to 5000 KVA
Technical Code: EDMS 08-102-2
Issued Date: 08/08/2023
TECHNICAL SPECIFICATION FOR EPOXY SOLID-CAST/VPE OR CAST COIL DRY - TYPE DISTRIBUTION TRANSFORMERs 10.5-11/0.4 KV 50 KVA up to 5000 KVA
-
EDMS 08-200-5 SPECIFICATION FOR OIL-IMMERSED DISTRIBUTION TRANSFORMERS FROM 25 kVA UP TO 5000 kVA 22 / 0.4 kV
Technical Code: EDMS 08-200-5
Issued Date: 05/11/2024
SPECIFICATION FOR OIL-IMMERSED DISTRIBUTION TRANSFORMERS FROM 25 kVA UP TO 5000 kVA 22 / 0.4 kV
-
EDMS 08-201-3 SPECIFICATION FOR DRY-TYPE DISTRIBUTION TRANSFORMERS FROM 50 kVA UP TO 5000 kVA 22 / 0.4 kV EPOXY SOLID-CAST / CAST RESIN COIL
Technical Code: EDMS 08-201-3
Issued Date: 08/08/2021
SPECIFICATION FOR DRY-TYPE DISTRIBUTION TRANSFORMERS FROM 50 kVA UP TO 5000 kVA 22 / 0.4 kV EPOXY SOLID-CAST / CAST RESIN COIL
-
EDMS 08-103-1 TECHNICAL SPECIFICATION FOR CAST /PRE-IMPREGNATED DRY - TYPE DISTRIBUTION TRANSFORMERS 10.5-11/0.4 KV 50 KVA up to 5000 KVA
Technical Code: EDMS 08-103-1
Issued Date: 01/01/0001
This specification covers the minimum technical requirements for design, engineering, manufacturing, testing, inspection, supply, delivery, packing, and installation, of three-phase solidcast resin/pre-impregnated coil (10.5-11/0.4KV) dry-type transformers for indoor installations for 50 HZ rated frequency network
-
EDMS 08-400-01 SPECIFICATION FOR Oil Immersed Coupling Power Transformers
Technical Code: EDMS 08-400-01
Issued Date: 09/05/2023
This specification covers the general requirements of design, manufacture, testing, supply and delivery of (22/11 KV or 11/22 KV), three-phase, two-windings oil immersed (Step-up or Step-down) power transformers with on load tap changer and local / remote tap change control panels rated up to 30 MVA at (ONAN/ONAF) Cooling. The transformers shall be suitable for indoor /outdoor installations of the power networks of Egyptian Electricity Distribution Companies (…EDCs).