المواصفات الفنية لمهمات شبكات التوزيع

09 - أعمدة

EDMS 09-400-3 SPECIFICATION FOR Galvanized Lattice Towers (Tension - Suspension - Crossing) For MV Networks up to 22 kV تحميل

إسم المواصفة
SPECIFICATION FOR Galvanized Lattice Towers (Tension - Suspension - Crossing) For MV Networks up to 22 kV
كود المواصفة
EDMS 09-400-3
تاريخ الإصدار
20/12/2022
تاريخ الإنتهاء
غير محدد
التوصيف
SPECIFICATION FOR Galvanized Lattice Towers (Tension - Suspension - Crossing) For MV Networks up to 22 kV
التفاصيل 
This standard provides the minimum technically acceptable requirements for design, manufacture, inspection, testing and supply
Structural towers for 12 kV overhead medium voltage lines. And a voltage of 24 kV. (with all its connections
and its accessories in various weather and environmental conditions in the electricity networks of the Egyptian Electricity Holding Company,
The specification includes, but is not limited to, the following types of towers:
- Suspension tower 12 meters high (drawing 9/12 m).
- Tension tower at an angle of 30 °, height of 12 m (drawing 10/12 m).
- A tensile tower with an angle of 60°, a height of 12 meters (drawing 11/12 m).
- Crossing tower 15 m high, angle and single link, drawing 12/15 m .
- Crossing tower, height 21.25 m, right angles, drawing 13 / 21.25 m .
تحميل المواصفة